PolyDADMAC - Poly(diallyl dimethyl ammon···

PolyDADMAC - Poly(diallyl dimethyl ammonium chloride)

PolyDADMAC - Poly(diallyl dimethyl ammonium chloride)

PolyDADMAC - Poly(diallyl dimethyl ammonium chloride)

PolyDADMAC is a cationic quaternary ammonium polymer which is completely dissolved in water, it contains strong cationic radical and activated adsorbent radical, which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the wastewater through electro-neutralization and bridging adsorption.

It achieves good results in flocculating, de-coloring, killing algae and removing organics.


Name: Poly(diallyl dimethyl ammonium chloride)

Synonyms: PDAC; Dimethyldiallylammonium chloride Polymers; Polyquaternium-6; 2-Propen-1-aminium,N,N-dimethyl-N-Propenyl-,chloride homopolymer; Poly(Dimethyldiallylammonium Chloride) Series; PDADMAC
;Quaternium-40; Polyquaternium-b; PolyDMDAAC; Poly(diallyldimethylammonium chloride); Polydiallyl dimethyl ammonium chloride; Poly(N,N-dimethyl-3,5-methylene piperidinum chloride); Polymer of dimethyl diallylammonium chloride
Decolor flocculant,high efficiency; Flocculant ST; PDMDAAC;  N,N-dimethyl-N-(prop-2-en-1-yl)prop-2-en-1-aminium chloride;  N,N-dimethyl-N-(prop-2-en-1-yl)prop-2-en-1-aminium; Poly Dimethyl Diallyl Ammonium Chloride; PolyDADMAC;

CAS:26062-79-3; EINECS:230-993-8

Chemical Formula: (C8H16NCl)n


Polydiallyldimethylammonium chloride, also commonly polyquaternium-6, is a homopolymer of diallyldimethylammonium chloride. The molecular weight of polyDADMAC is typically in the range of hundreds of thousands of grams per mole, and even up to a million for some products.

Application & Usage:
PolyDADMAC is used in waste water treatment as a primary organic coagulant which neutralizes negatively charged colloidal material and reduces sludge volume compared with inorganic coagulants.

Application Method
When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).

When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water.

The most economical dosage is based on the trial.

The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.

It is better to dose the product continuously.

For more information or Inquiry about of this product, please contact us :
TIAN@CHEM.NET

Share:
#

REQUEST A FREE QUOTE

Get answers and advice from people you want it from.